Difference between revisions of "Wild openQCM"

From Hackteria Wiki
Jump to: navigation, search
Line 49: Line 49:
 
<br><br>
 
<br><br>
 
guess now we need some bioactive coating...<br>
 
guess now we need some bioactive coating...<br>
 +
The temoerature sensor can be connected to analog pin A1 of the arduino - did not get any reading from this? hmm...?

Revision as of 22:09, 28 March 2015

Astrophysistis from Novaetech S.r.l. made open hardware a quartz crystal microbalance - http://openqcm.com/

"QCM could be used as a tunable gas sensor and for monitoring the aerosol deposition in ambient conditions. The applications in liquid environment show enormous potentiality. QCM is very effective in measuring binding events on functionalized surface, such as antigen­-antibody binding and protein-­protein interactions. It is a powerful tool in life sciences, being able to sense DNA hybridization and specific drug compounds."

if you know how to make thin film deposition... (not part of the open project)

The website provides a download for the software, electronics and 3D printed parts as well as some information and nice pictures on the technology...

DIY Build

lets build one - see if I find all the materials needed in my lab or stores around the corner (highest level open hardware check).

The crutial part beeing the quartz crystal oscillator Ryan George contributed the perfect hack: "you could always take the crystal out of a timer..."

| quartz crystal oscillator

ahh, you can also buy the sensor from the openQCM store for 14 euro... reasonable.

| Fun With Crystal Oscillators
Quartz Cristal oscillator

I did it. Never new what was inside these devices - amazing hack.

Quartz Cristal Hack, open oscillator
We just need to find an easy way to open that little can. Maybe can be kept as housing with drilling two holes for gas in and outlets...
inside of open oscillator


Downloaded 3D files, electronics, BOM, Software. Everything here and looks ok. 3D files are not design for simple 3D Printer (lot of overhang) some simple laser cut parts would be better... Overall the project looks quite straight forward and the source files are easy to find and of good quality. Naaice.

3D Printing is fun
While the 3D printer is printing the case, lets run the openQCM software from an arduino UNO with the hacked sensor...
Download and install is easy, you need to install the Library in your arduino library folder.
depending on what board you have the frequence (sensor, SIG) input pin changes, see list on FreqMessure site. For Arduino UNO it is pin 5.
pinout of open oscillator

Power to the oscillator and output pin 3 to arduino pin 5. Start the openQCM software and here we go...

wild openQCM hoockup
Hit connect and search for port in the bottom right of the openQCM viewer.
Result when spitting on the sensor - is this what I am supposed to get...
sensor readout

guess now we need some bioactive coating...
The temoerature sensor can be connected to analog pin A1 of the arduino - did not get any reading from this? hmm...?