Difference between revisions of "Mineral fiber based TiO2 photo-electrode in DSSC"

From Hackteria Wiki
Jump to: navigation, search
m
m (The woven photo-electrode)
Line 1: Line 1:
 
==First prototype==
 
==First prototype==
 
===The woven photo-electrode===
 
===The woven photo-electrode===
The TiO2 paste 18NR-AO purchased from Greatcell Solar is coated onto the mineral woven fabric provided by Isomatex by doctor-blade method. The fabric is then fired with conventional kitchen electric stove under 400˚C to 440˚C and it's soaked into annatto dyes for 5 hours after cooling down. The final piece appears in golden color after dyeing process is completed. The backside of the fabric is coated with silver paste (A729)
+
The TiO2 paste 18NR-AO purchased from Greatcell Solar is coated onto the mineral woven fabric provided by Isomatex by doctor-blade method. The fabric is then fired with conventional kitchen electric stove under 400˚C to 440˚C and it's soaked into annatto dyes for 5 hours after cooling down. The final piece appears in golden color after dyeing process is completed. The backside of the fabric is coated with silver paste (A729) by the doctor-blade method and is cured in 200˚C. Finally the fabric is soaked in N719 dye for 5 hours.
  
 
===The counter-electrode===
 
===The counter-electrode===

Revision as of 21:03, 4 October 2023

First prototype

The woven photo-electrode

The TiO2 paste 18NR-AO purchased from Greatcell Solar is coated onto the mineral woven fabric provided by Isomatex by doctor-blade method. The fabric is then fired with conventional kitchen electric stove under 400˚C to 440˚C and it's soaked into annatto dyes for 5 hours after cooling down. The final piece appears in golden color after dyeing process is completed. The backside of the fabric is coated with silver paste (A729) by the doctor-blade method and is cured in 200˚C. Finally the fabric is soaked in N719 dye for 5 hours.

The counter-electrode

The



Data sheet of Woven Fabric from ISOMATEX S.A. File:Woven-Fabrics-TDS-ISMTX.pdf