Difference between revisions of "Laser-cut microscopy stages"

From Hackteria Wiki
Jump to: navigation, search
Line 9: Line 9:
 
== Hackstage V1 ==
 
== Hackstage V1 ==
  
[[File:HackStage1.jpg|300px|none|thumb|Most simple Stage]]
+
[[File:HackStage1.jpg|400px|none|thumb|Most simple Stage]]
  
  
Line 16: Line 16:
 
[[File:DesigningSketch.jpg|none|200px|Marc while designing a first prototype]]
 
[[File:DesigningSketch.jpg|none|200px|Marc while designing a first prototype]]
 
Sketches for the hackstage
 
Sketches for the hackstage
 +
<br>
 +
[[File:MarcWithHackStage.jpg|none|200px|Marc while designing a first prototype]]
  
 
<br>
 
<br>
  
 
== Hackstage V2 ==
 
== Hackstage V2 ==
 +
 +
[[File:HackStage2.jpg|300px|none|thumb|Most simple Stage]]
 +
  
 
[[File:Antti1.jpg|none|200px|]]
 
[[File:Antti1.jpg|none|200px|]]

Revision as of 20:51, 8 August 2011

Stage Designs and Kits for WebCam Microscopes

In the course of the may workshops on webcam microscopes dozens of genius designs were born. Each setup is unique and the result of an intensive construction and learning process. To integrate some of the experiences and speed up the process of construction you find some stage designs on this page. These designs use acrylic glass and are easy to reproduce using a laser cutter like you can find them in most FabLabs.


Most simple Stage

Hackstage V1

Most simple Stage


DesigningPrototype.jpg

Marc while designing a first mockup

Marc while designing a first prototype

Sketches for the hackstage

Marc while designing a first prototype


Hackstage V2

Most simple Stage


Antti1.jpg
Antti2.jpg

Anttis Prototype for Hackstage V2


MiniScope 1

Most simple Stage


MiniScope 2

Most simple Stage


Emika.jpg

Emika working on the Miniscope

FabLabJapan.jpg

Miniscope Workshop with FabLab Japan


x-y stage, servo controlled