Difference between revisions of "Jurus Sulam Listrik workshop 2022"

From Hackteria Wiki
Jump to: navigation, search
m (Abstract)
(Abstract)
Line 6: Line 6:
 
In this workshop you will be introduced how to manufacture circuits with embroidery threads and conductive threads, assemble LEDs with sewing instead of soldering. However the smd components still require soldering. The circuits in this workshop we will using is from "Mixed Tape", which is an audio programmable Attiny85 circuit. Attiny85 is a micro Arduino chip which allowed you to do several task, it enables you to do several jobs like LED blinks, motor movements or sensor readings etc.
 
In this workshop you will be introduced how to manufacture circuits with embroidery threads and conductive threads, assemble LEDs with sewing instead of soldering. However the smd components still require soldering. The circuits in this workshop we will using is from "Mixed Tape", which is an audio programmable Attiny85 circuit. Attiny85 is a micro Arduino chip which allowed you to do several task, it enables you to do several jobs like LED blinks, motor movements or sensor readings etc.
 
<gallery>
 
<gallery>
I am Very Happy I Hope You are too 01.jpg|example1
+
I am Very Happy I Hope You are too prototype 01.jpeg|Caption1
I am Very Happy I Hope You are too prototype 01.jpg|example2
+
Example.jpg|Caption2
 
</gallery>
 
</gallery>
  

Revision as of 08:24, 1 July 2022

Jurus Sulam Listrik Workshop

Abstract

This workshop introduce the technique that Shih Wei Chieh employs it in his e-textile work "I am Very Happy I Hope You are too" which he created in his residency program in Oaxaca, Mexico 2013. The purpose was to allow, encourage untrained engineer, local aztec villager to participate circuits manufacturing with craft skill they are familiar with such as embroidery technique, stitching, weaving.

In this workshop you will be introduced how to manufacture circuits with embroidery threads and conductive threads, assemble LEDs with sewing instead of soldering. However the smd components still require soldering. The circuits in this workshop we will using is from "Mixed Tape", which is an audio programmable Attiny85 circuit. Attiny85 is a micro Arduino chip which allowed you to do several task, it enables you to do several jobs like LED blinks, motor movements or sensor readings etc.

Materials

Tweezers resistors 223

resistor 102

Piezo

3.5 audio terminal

Coin battery

Battery holder

Embroidery Needle

Embroidery frame

Capacitor nf

EMF tape

Attiny85

References