Difference between revisions of "DIY Microscopy Instruction (Japanese)"

From Hackteria Wiki
Jump to: navigation, search
(1. ウェブカメラの改造 パートB: 顕微鏡に改造)
(1. ウェブカメラの改造 パートA: 小さい世界の拡大)
 
(19 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== Instructions to be translated ==
 
== Instructions to be translated ==
[[File:hackteria-mikroskop-2012-137.JPG|right|400px|thumb|The Chapter about the DIY microscope can be downloaded [http://hackteria.org/wp-content/uploads/2013/05/hm3-hackteria-pages.pdf here] and available now with Chinese translation included!  
+
[[File:hackteria-mikroskop-2012-137.JPG|right|400px|thumb|The Chapter about the DIY microscope can be downloaded [http://hackteria.org/wp-content/uploads/2013/05/hm3-hackteria-pages.pdf here] and available now with Chinese translation included!]]
  
 
Would be great to have this also in other languages, below is the english original to get you started.
 
Would be great to have this also in other languages, below is the english original to get you started.
Line 69: Line 69:
 
*市販のウェブカメラの色々。レンズのマニュアルフォーカスできるウェブカメラモデルがDIY顕微鏡用に適している。 トライアンドエラーで好きなモデルを決めよう。
 
*市販のウェブカメラの色々。レンズのマニュアルフォーカスできるウェブカメラモデルがDIY顕微鏡用に適している。 トライアンドエラーで好きなモデルを決めよう。
  
*ウェブカメラの改造前にコンピューターに繋げ、ウェブカメラが作用するかを試そう(ドライバーのインストールなど)。Windows, Mac, or Linux.
+
*ウェブカメラの改造前にコンピューターに繋げ、ウェブカメラが作用するかを試そう(ドライバーのインストールなどWindows, Mac, or Linuxによって違う)。
  
 
[[File:Step_2_screw_lens_outwards.jpg|800px]]
 
[[File:Step_2_screw_lens_outwards.jpg|800px]]
Line 85: Line 85:
 
* カッターなどを使い、銅線、USBケーブルは切らないで残しカメラ後ろのプラスチックケースを取り除く。エレクトロニクス、ケーブル全てが放たれる。
 
* カッターなどを使い、銅線、USBケーブルは切らないで残しカメラ後ろのプラスチックケースを取り除く。エレクトロニクス、ケーブル全てが放たれる。
 
* ウェブカメラ内部:写真左に見える内臓マイクは必要ない。
 
* ウェブカメラ内部:写真左に見える内臓マイクは必要ない。
* レンズを逆さまに取り付ける。正しい方向と違い、ねじで取り付けることはできないので、光を通さないダクトテープなどでNow we place the optics upside down on the fitting. It can no longer be screwed on and must therefore be firmly secured. The optics is attached with a piece of duct tape.
+
* レンズを逆さまに取り付ける。正しい方向と違い、ねじで取り付けることはできないので、光を通さないダクトテープなどでしっかりと取り付ける。
* To test the equipment we connect the modified webcam with the computer and point the lens towards the screen. Now the individual
+
* 正しく取り付けられたかを試すために、改造したウェブカメラをUSBケーブルでコンピューターにつなぎ、レンズをコンピュータースクリーンに向け、スクリーンを観察する。スクリーンのRGBピクセルが見える。
RGB pixels on screen become visible.
 
  
=== 2. Construction of the platform ===
+
=== 2. スタンドの工作 ===
 
[[File:Step_4_make_stage.jpg|800px]]
 
[[File:Step_4_make_stage.jpg|800px]]
  
* Using small lumps of Blu-Tack adhesive, the webcam is attached to a solid pasteboard of about 15 x 15 cm.
+
* 土台。粘着粘土などを使い、ウェブカメラをプラットフォームとなる 15 x 15 cm 程の段ボールなどの土台に配置する。
* The platform’s side wall consisting of scale model cardboard. With a pencil we draw the height of the lens on it and cut off the cardboard along that line. We use hot glue for pasting.
+
* スタンドの壁を作る。スチレンボード、工作紙などを使い、レンズの高さを壁に記し、工作紙をこの高さで切り取り、壁をホットグルーで取り付ける。
* Using a carpet cutter, we cut a rectangular opening into another piece of scale model cardboard. This piece too is attached with hot glue.
+
* スライドを置く台。カッターを使い、別なスチレンボードにレンズが見えるサイズの窓を切り取る。これもホットグルーで壁に取り付ける。
  
 
[[File:Step_5_adjustable_focus.jpg|800px]]
 
[[File:Step_5_adjustable_focus.jpg|800px]]
  
* The adjustable screw requires a hole. We attach the screw nut right at the top with a small drop of hot glue. Then we insert the adjustable screw. It must reach down to the lower platform.
+
* 焦点を合わせるためのダイアル。ダイアル用のねじのために穴をあける。ねじにあったサイズのナットを穴の上にホットグルーで取り付ける。ねじは土台まで届く長さを使う。
* Rubber bands provide more stability to the platform. With the screw the scale model board can now be moved up and down by a few millimeters.
+
* プラットフォームの安定。土台に足を付け、輪ゴムで土台とスライド台を安定させる。ねじを回すことでスライド台を数ミリ単位で上下に動かすことができる。
  
=== 3. The light source ===
+
=== 3. 照明 ===
 
[[File:Step_6_add_ligthing.jpg|800px]]
 
[[File:Step_6_add_ligthing.jpg|800px]]
  
* Our microscope also has a light source in the form of a light-emitting diode (LED). The lighting can be easily produced by oneself.
+
* 顕微鏡工作のために使ったウェブカメラにLEDが付いていない場合でも照明は簡単に付け足せる。
* In this easy way, the wires can be twisted together. But it is safer if they are solded on.
+
* LEDに銅線をつなげる。はんだで取り付ける方が安全。LED、ポテンショメーター(ライトの強さを調節するため)、電池を繋げた図。
* The centimeters long feed of our light source is wrapped with garden wire. The wire thus becomes pliable and later can be attached in any position.
+
* サンプルを自由に照明できるよう、数センチの長さを針金で安定させる。照明角度を変えることが出来る。
* The light source, potentiometer and battery are attached to our construction with hot glue. Our DIY MICROSCOPE is ready for use.
+
* LED、ポテンショメーター、電池を固定させる。DIY 顕微鏡の出来上がり。
  
=== 3.B Hacking the LEDs from the Webcam (to be documented) ===
+
=== 3.B ウェブカメラのLEDを照明に使う (準備中) ===
  
 
* Coming soon
 
* Coming soon
  
=== 4. Using the Microscope and Hunting for Microorganisms ===
+
=== 4. DIY顕微鏡でミクロの世界を探検 ===
 
[[File:Step_7_go_hunting.jpg|800px]]
 
[[File:Step_7_go_hunting.jpg|800px]]
  
* The USB cable of the converted webcam is connected to the computer. Now we can begin with our examinations.
+
* 改造したウェブカメラのUSBケーブルをコンピューターにつなげる。何か観察したいサンプルを探してこよう。
* The study objects are placed on a glass slide and can be shifted by hand. The microscope’s focus is regulated by the adjustable screw.
+
* スライドガラスにサンプルを用意し、サンプル台にスライドを乗せ、手でスライドガラスを動かす。ねじを使い、焦点を合わす。
* As with a professional microscope, with our DIY tool we are able to take electronic photos and even films. Photos and films are digitally available, can be further processed and of course be easily published on the Internet.
+
* DIY顕微鏡を使いデジタル写真、動画の録画もできる。デジタル編集をしてネットにミクロの世界をアップロード!

Latest revision as of 11:39, 29 December 2015

Instructions to be translated

The Chapter about the DIY microscope can be downloaded here and available now with Chinese translation included!

Would be great to have this also in other languages, below is the english original to get you started.

Translations

DIY Mikroskop Anleitung (Deutsch)

DIY Microscopy Instruction (Chinese)

DIY Microscopy Instruction (Spanish)

DIY Microscopy Instruction (Bahasa Indonesia)

DIY Microscopy Instruction (French)

DIY Microscopy Instruction (Japanese)

0. はじめに

ハクテリアのDIY顕微鏡工作のコンセプトは誰にでもできる市販のウェブカメラの改造です。ウェブカメラのエレクトロニクスはノータッチで、レンズの位置を変えるだけ。その上に、安定したスタンドを作り、LEDライトでサンプルを照明します。

DIY顕微鏡製作三段階

  • ウェブカメラの改造
  • スタンド作り
  • 発行ダイオード light-emitting diode (LED)の照明

用意するものリスト

DIY-Microscope Instructions Materials.png

材料

  • 1 ウェブカメラ
  • 厚めのダンボール / 工作用 木材 20 x 30 cm
  • スチレンボード 20 x 30 cm
  • M4 ネジ 長さ約 15 mm とボルト
  • ダクトテープ
  • 粘着ゴム
  • ホットメルトグルーガン用のグルーステイック
  • 輪ゴム

道具

  • カッター
  • ねじ回し
  • ホットメルトグルーガン
  • (オプション) はんだごて

オプション、外部LED照明光源

  • 1 スイッチ
  • 1 白 LED
  • 1 電池 (9V)
  • 1 ケーブル付き バッテリーホルダー
  • 1 抵抗 レジスタ (1 k Ω )
  • 1 ポテンショメーター (20 k Ω )
  • 30 cm 絶縁線
  • 針金

顕微鏡分析、微生物観察 用具

  • 透明なプラスチックカップ
  • スライドガラス
  • ペトリ皿 プラスチック、又はガラス
  • ピペット
  • 油性ペン
  • 小さじ
  • ピンセット
  • サンプル用小さいプラスチック容器

1. ウェブカメラの改造 パートA: 小さい世界の拡大

Step 1 get stuff.jpg

  • 市販のウェブカメラの色々。レンズのマニュアルフォーカスできるウェブカメラモデルがDIY顕微鏡用に適している。 トライアンドエラーで好きなモデルを決めよう。
  • ウェブカメラの改造前にコンピューターに繋げ、ウェブカメラが作用するかを試そう(ドライバーのインストールなどWindows, Mac, or Linuxによって違う)。

Step 2 screw lens outwards.jpg

  • この時点でウェブカメラを使い身の回りの世界を拡大してみる。レンズのネジを緩め、ポケットランプなどでサンプルを照らし、観察したいサンプルに近づいてみよう。
  • ウェブカメラを改造しなくても肉眼で見えない世界が見えて来る。

1. ウェブカメラの改造 パートB: 顕微鏡に改造

Step 3 invert lens.jpg

  • ウェブカメラの解体を始める。見えるねじ、そしてラベルやゴムの下に隠れているねじを全て取り除く。しっかりとした道具、例えばねじ回し、スイスアーミーナイフ(写真)でウェブカメラのカバー本体をこじ開ける。
  • ウェブカメラ内部:カメラの眼になるセンサー、エレクトロニクスのスイッチ。照明用LEDは別に後から取り付けるので元のLEDは必要ない。
  • レンスは接着剤で取り付けてあるので、気をつけてエレクトロニクスから取り外す。レンズの外側に付いている輪カバー(写真右)は使わない。
  • カッターなどを使い、銅線、USBケーブルは切らないで残しカメラ後ろのプラスチックケースを取り除く。エレクトロニクス、ケーブル全てが放たれる。
  • ウェブカメラ内部:写真左に見える内臓マイクは必要ない。
  • レンズを逆さまに取り付ける。正しい方向と違い、ねじで取り付けることはできないので、光を通さないダクトテープなどでしっかりと取り付ける。
  • 正しく取り付けられたかを試すために、改造したウェブカメラをUSBケーブルでコンピューターにつなぎ、レンズをコンピュータースクリーンに向け、スクリーンを観察する。スクリーンのRGBピクセルが見える。

2. スタンドの工作

Step 4 make stage.jpg

  • 土台。粘着粘土などを使い、ウェブカメラをプラットフォームとなる 15 x 15 cm 程の段ボールなどの土台に配置する。
  • スタンドの壁を作る。スチレンボード、工作紙などを使い、レンズの高さを壁に記し、工作紙をこの高さで切り取り、壁をホットグルーで取り付ける。
  • スライドを置く台。カッターを使い、別なスチレンボードにレンズが見えるサイズの窓を切り取る。これもホットグルーで壁に取り付ける。

Step 5 adjustable focus.jpg

  • 焦点を合わせるためのダイアル。ダイアル用のねじのために穴をあける。ねじにあったサイズのナットを穴の上にホットグルーで取り付ける。ねじは土台まで届く長さを使う。
  • プラットフォームの安定。土台に足を付け、輪ゴムで土台とスライド台を安定させる。ねじを回すことでスライド台を数ミリ単位で上下に動かすことができる。

3. 照明

Step 6 add ligthing.jpg

  • 顕微鏡工作のために使ったウェブカメラにLEDが付いていない場合でも照明は簡単に付け足せる。
  • LEDに銅線をつなげる。はんだで取り付ける方が安全。LED、ポテンショメーター(ライトの強さを調節するため)、電池を繋げた図。
  • サンプルを自由に照明できるよう、数センチの長さを針金で安定させる。照明角度を変えることが出来る。
  • LED、ポテンショメーター、電池を固定させる。DIY 顕微鏡の出来上がり。

3.B ウェブカメラのLEDを照明に使う (準備中)

  • Coming soon

4. DIY顕微鏡でミクロの世界を探検

Step 7 go hunting.jpg

  • 改造したウェブカメラのUSBケーブルをコンピューターにつなげる。何か観察したいサンプルを探してこよう。
  • スライドガラスにサンプルを用意し、サンプル台にスライドを乗せ、手でスライドガラスを動かす。ねじを使い、焦点を合わす。
  • DIY顕微鏡を使いデジタル写真、動画の録画もできる。デジタル編集をしてネットにミクロの世界をアップロード!