Difference between revisions of "DIY Microfluidics"

From Hackteria Wiki
Jump to: navigation, search
Line 15: Line 15:
 
== Preparing the slide ==
 
== Preparing the slide ==
  
 +
<br>
 +
[[File:uF_InkScapeDrawing.jpg|none|350px|]]
 +
Draw a nice pattern with InkScape
 
<br>
 
<br>
 
[[File:uF_DIYLaserCutting.jpg|none|700px|]]
 
[[File:uF_DIYLaserCutting.jpg|none|700px|]]

Revision as of 22:35, 3 January 2012

Stuff from wetPONG

HomeMade Microfluidics on wetPONG

more coming soon...


Advanced DIY Microfluidics

Just a Hack! How did he do that... awesome!

Micro Fluidic Hack


Preparing the slide


Draw a nice pattern with InkScape

UF DIYLaserCutting.jpg

Putting (balck) tape on a glas slide. Cut it with a sharp knife or with a DIY laser cutter 8-)
DIY laser cutter:[1]

UF LaserCutTape.jpg

The slide with the cut tape

UF Peal.jpg

Peel of the tape carefully

UF Slides.jpg

Some sample slides

PDMS Casting


UF CastingBoxes.jpg

Putting the slides in casting boxes

UF PDMSCasting.jpg

Cast with PDMS and cure at 60°C for about 1 hour.

UF Uncasting.jpg

Remove the cast

UF Punching.jpg

Plasma activate a clean glas slide and the PDMS piece (where to get the plasma from?)
Put the PDMS piece back into a clean box and cover with a tube holder plate. Punch the holes.

UF WebCamStage.jpg

Attatch tubes and capture the microflow with a webcam stage.




UF FabLabParts.jpg

Parts lasercut from acrylic in the FabLab Lucern.
Files will come...