CO2 Soil Respiration Chamber

From Hackteria Wiki
Revision as of 01:52, 20 June 2018 by Dusjagr (talk | contribs) (Soil Geeking @ Lifepatch with Matt)
Jump to: navigation, search

Developed during the RandeLab Soil Retreat as part of the HUMUS.Sapiens research phase and discussed on the forum.

See Hackteria Website

CO2 soil chambers

BambooBox

Further developments during dusjagr's residency at Lifepatch June - August 2018

IMG 20180616 122121.jpg

PVC pipe Chambers

Wiring diagram

CO2-BambooBox WiringSchema.jpg

RandeChamber aka Kilju Chamber

RandeSoilChamber.jpgKiljuChamber laserCut.jpg

Failed PCB...

KiljuBox SZ-Ready.pngCO2 littleBox digitalMockUp.png

Early Experiments

First Prototypes

First CO2 setup MH-Z19.jpgFirst CO2 soil trial MH-Z19.jpg

Comparing sensors and chambers

Using the Our-Sci Platform

IMG 20180419 172702 HDR.jpg

https://app.our-sci.net/#/survey

Our-sci dataPlot.png

Soil Geeking @ Lifepatch with Matt

Great opportunity to do some testing and sharing of protocols with Matthew Daniel from Global Urban Forest

More about CO2 sensors:

See RandeLab GitHub for Arduino / Teensy codes

Nondispersive infrared sensor

MH-Z16, available with an I2C board:

MH-Z19:

MH-Z19 working.jpg

This page is about the MH-Z19 CO2 sensor and some experiments done with it:

Using the MH-Z19 CO2 sensor PWM readout, simple arduino code:

More on ABC, Automatic Baseline Correction

Immerhin kann man den Sensor per Hd-Pin (7s gegen GND) auf 400ppm (Außenluft) eichen.

CCS811

CCS BME combo

2017-03-25T20-47-46.605Z-BME280 CCS811.jpg

https://learn.sparkfun.com/tutorials/ccs811bme280-qwiic-environmental-combo-breakout-hookup-guide#resources--going-further

This one I ordered 2.... but check I2C adress. and connect "WAK" to GND

  • #define CCS811_ADDR 0x5A //Alternate I2C Address
  • myBME280.settings.I2CAddress = 0x76;

https://www.tindie.com/products/onehorse/air-quality-sensors/