Agar is the Media

From Hackteria Wiki
Revision as of 13:13, 31 July 2014 by Dusjagr (talk | contribs) (Ingredients)
Jump to: navigation, search

Media Recipes

MEA Malt Extract Agar with Antibiotics

Ingredient 1 L 500 ml 250 ml
Part 1
Distilled water 1000 ml 500 ml 250 ml
Malt extract 20 g 10 g 5 g
Agar 15 g 7.5 g 3.75 g
Part 2
Benlate stock solution 10 ml 5 ml 2.5 ml
Streptomycin sulphate .1 g .05 g 25 mg
Neomycin sulphate .1 g .05 g 25 mg
Chlortetacycline .1 g .05 g 25 mg

Malt Extract Agar - Simple

Ingredient 1 L 500 ml 250 ml
Part 1
Bottled water (Evian) 1000 ml 500 ml 250 ml
Malt extract 20 g 10 g 5 g
Agar 20 g 10 g 5 g
Part 2

Sterile Technique and Agar Culture

Exerpts from "The Mushroom Cultivator, Stamets and Chilton, 1984"

Water quality (its pH and mineral content) varies from region to region. If living in an area of questionable water purity, the use of distilled water is advisable. For all practical purposes, however, tap water can be used without harm to the mushroom mycelium. A time may come when balancing pH is important—especially at spore germination or in the culture of exotic species. The pH of media can be altered by adding a drop at a time of 1 molar concentration of hydrochloric acid (HCL) or sodium hydroxide (NaOH). The medium is thoroughly mixed and then measured using a pH meter or pH papers. (One molar HCL has a pH of 0; one molar NaOH has a pH of 12; and distilled water has a pH of 7).

After thoroughly mixing these ingredients, sterilize the medium in a pressure cooker for 30 miutes at 15 psi (equals 103 KPa). (Pressure cookers are a safe and effective means of sterilizing media provided they are operated according to the manufacturer's instructions). A small mouthed vessel is recommended for holding the agar media. If not using a flask specifically manufactured for pouring media, any narrow necked glass bottle will suffice. Be sure to plug its opening with cotton and cover with aluminum foil before inserting into the pressure cooker. The media container should be filled only to 2/3 to 3/4 of its capacity.

Place the media filled container into the pressure cooker along with an adequate amount o water for generating steam. (Usually a 1/2 inch layer of water at the bottom will do). Seal the cooker according to the manufacturer's directions. Place the pressure cooker on a burner and heat until ample steam is being generated. Allow the steam to vent for 4-5 minutes before closing the stop cock. Slowly bring the pressure up to 15 psi and maintain for 1/2 hour. Do not let the temperature of the cooker exceed 250 °F. or else the sugar in the media will caramelize. Media with caramelized sugar inhibits mycelial growth and promotes genetic mutations. A sterilized pot holder or newly laundered cloth should be handy in the sterile lab to aid in removing the media flask from the pressure cooker. While the media is being sterilized, immaculately clean the laboratory.

http://www.amazon.com/The-Mushroom-Cultivator-Practical-Mushrooms/dp/0961079800

Exerpts from "Microbiology at Home" by Simon Park

See more on Simon Park's website Exploring the Invisible

The second edition of a classic text. Well perhaps not, but a new and improved version of “Microbiology at Home: A Short Non-Laboratory Manual for Enthusiasts and BioArtists”. Techniques for growing bacteria at home. Download manual here

"During sterilization the molten agar will tend to sink to the bottom of the containers so to ensure a uniform distribution before pouring, the media should be gently shaken after sterilization, while it cools."

Agar Fun


Links:
How to purify agar:
http://openwetware.org/wiki/DIYbio/FAQ/Equipment#How_do_you_purify_agar.3F


Methylene Blue DNA staining protocol:
http://www.bio.net/bionet/mm/methods/1993-December/010023.html

Agar-Musical-Game:
http://openmaterials.org/2012/03/26/noisy-jelly-a-jello-based-musical-game/