Difference between revisions of "Team Mentorzzzz"

From Hackteria Wiki
Jump to: navigation, search
(Sync HeartBeat to KORG Volca)
(Sync HeartBeat to KORG Volca)
Line 8: Line 8:
  
 
[[File:HeartBeat_serialOutput.png|thumb|left|400px|Checking the signals in Serial Plotter of Arduino IDE]]
 
[[File:HeartBeat_serialOutput.png|thumb|left|400px|Checking the signals in Serial Plotter of Arduino IDE]]
 
+
<br clear=all>
 
Gaudi edited the main Heart beat Code, Spike Recoreder V1.1 to have an output LED HIGH on Pin 12, when a 80% gliding max threshold is reached.
 
Gaudi edited the main Heart beat Code, Spike Recoreder V1.1 to have an output LED HIGH on Pin 12, when a 80% gliding max threshold is reached.
  

Revision as of 11:07, 15 February 2019

Yeah we have our own wiki page!!!

Onyx ashanti face.jpg


let go back to Medizintechnik DIY

Sync HeartBeat to KORG Volca

Checking the signals in Serial Plotter of Arduino IDE


Gaudi edited the main Heart beat Code, Spike Recoreder V1.1 to have an output LED HIGH on Pin 12, when a 80% gliding max threshold is reached.

https://gist.github.com/dusjagr/73773c650bf341842f70b08953fae009

Hallo


Just connect the KORG Sync-In with the BYB cable to your shield and there you go, the TEMPO of the synthesizer is controlled by your heartbeat. Each beat will be followed by 2 steps on the KORG, which is typical to allow swing and other sub-step rythms.