RISO PRINT GOCCO LAMP sintered silver nanowires

Abstract

According to "Light sintering of ultra-smooth and robust silver nanowire networks embedded in poly(vinyl-butyral) for flexible OLED" the sintering of the Ag-NW conductive layer can be done by intensive pulse light (IPL), using strong white light to create heat to welder Ag-NWs to form a network to increase the conductivity. An alternative light source is performed in this experiment due to the difficulty to obtain expansive IPL. GOCCO RISO print kit is a Japanese riso print kit that allow user to create personalized riso print mask by the heat created from the exploded light bulb provided in the kit. This experiment compares the conductivity of Ag-NW coated substrate before the GOCCO lamp exposure and after.

Gacco Lamp Sintered AgNWs PVM film (on going)

A conductive, uniform, and ultra-smooth flexible transparent composite film is produced by embedding silver nanowires (Ag-NWs) into poly(vinyl-butyral) (PVB) without pressure or high-temperature annealing.

• Print GOCCO lamp
• 

  Print GOCCO lamp with the printing case.

• 

  GOCCO lamp installed in the lamp case.

• 

  Close-up photo of the GOCCO lamp.

• 

  GOCCO kit introduction tape, package of GOCCO lamp and the lamps.

References

1. The original usage of Riso print GOCCO lamp RISO PRINT GOCCO LAMP tutorial.