View source for RISO PRINT GOCCO LAMP sintered silver nanowires

=Abstract=
According to "Light sintering of ultra-smooth and robust silver nanowire networks embedded in poly(vinyl-butyral) for flexible OLED" the sintering of the Ag-NW conductive layer can be done by intensive pulse light (IPL), using strong white light to create heat to welder Ag-NWs to form a network to increase the conductivity. An alternative light source is performed in this experiment due to the difficulty to obtain expansive IPL. GOCCO RISO print kit is a Japanese riso print kit that allow user to create personalized riso print mask by the heat created from the exploded light bulb provided in the kit. This experiment compares the conductivity of Ag-NW coated substrate before the GOCCO lamp exposure and after.
==Gacco Lamp Sintered AgNWs PVM film (on going)==
[[File:PVB_AgNWs_transfering.png|thumb|400px|A conductive, uniform, and ultra-smooth flexible transparent composite film is produced by embedding silver nanowires (Ag-NWs) into poly(vinyl-butyral) (PVB) without pressure or high-temperature annealing.]]
The Japanese toy kit "RISO PRINT GOCCO LAMP" was introduced by the founder of Bioclub Tokyo, [http://bioclub.org/ Bioclub], Georg Tremmel.

<gallery mode="traditional" widths=360px heights=240px caption="Print GOCCO lamp>
File:RISO PRINT GACCO LAMP2.jpeg|Print GOCCO lamp with the printing case.
File:RISO PRINT GACCO LAMP1.jpeg|GOCCO lamp installed in the lamp case.
File:RISO PRINT GACCO LAMP5.jpeg|Close-up photo of the GOCCO lamp.
File:RISO PRINT GACCO LAMP4.jpeg|GOCCO kit introduction tape, package of GOCCO lamp and the lamps.
<ref>Insert RISO GACCO LAMP KIT here</ref>
</gallery>
=References=
#The original usage of Riso print GOCCO lamp [https://www.youtube.com/shorts/uURKi2lCHQg RISO PRINT GOCCO LAMP tutorial].