Difference between revisions of "Mineral fiber based TiO2 photo-electrode in DSSC"
From Hackteria Wiki
Shihweichieh (talk | contribs) (Created page with "==First attempt of sinter TiO2 porous layer on mineral fabric== Here the TiO2 is coated onto a mineral woven fabric by doctor-blade method. The TiO2 paste 18NR-AO was purchase...") |
Shihweichieh (talk | contribs) (→First attempt of sinter TiO2 porous layer on mineral fabric) |
||
| Line 11: | Line 11: | ||
File:Sintered and dyed 18NR-AO TiO2 on FILAVA WF.jpg | File:Sintered and dyed 18NR-AO TiO2 on FILAVA WF.jpg | ||
</gallery> | </gallery> | ||
| + | |||
| + | Data sheet of Woven Fabric from ISOMATEX S.A. | ||
| + | [[:File:Woven-Fabrics-TDS-ISMTX.pdf]] | ||
Revision as of 11:11, 2 October 2023
First attempt of sinter TiO2 porous layer on mineral fabric
Here the TiO2 is coated onto a mineral woven fabric by doctor-blade method. The TiO2 paste 18NR-AO was purchased from Greatcell Solar, and the FILAVA mineral woven fabric was purchased from Isomatex S.A. The coated TiO2 layer was fired with conventional kitchen electric stove, the temperature was set to 8, which is proximately measured 400 to 440 celsius with temperature gun. The sintered TiO2 layer was then soak into annatto dyes for ~5 hours. The woven FILAVA fabricc turned golden color.
Data sheet of Woven Fabric from ISOMATEX S.A. File:Woven-Fabrics-TDS-ISMTX.pdf
