DIY Microfluidics
Contents
Stuff from wetPONG
HomeMade Microfluidics on wetPONG
more coming soon...
Nail Studio Micro Fluidics
Other projects
https://beaverworks.ll.mit.edu/CMS/bw/Open_Source_Microfluidics
http://science-practice.com/blog/2015/01/29/low-tech-microfluidics/
http://journals.plos.org/plosbiology/article?id=10.1371/journal.pbio.1002110
Enabling Microfluidics: from Clean Rooms to Makerspaces download paper here: File:Kong2017_Enabling_Microfluidics_in_Makerspaces.pdf
Advanced DIY Microfluidics
Just a Hack! How did he do that... awesome!
Preparing the slide
Draw a nice pattern with InkScape
Putting (black) tape on a glas slide. Cut it with a sharp knife or with a DIY laser cutter 8-)
DIY laser cutter:[1]
The slide with the cut tape
Peel of the tape carefully
Some sample slides
PDMS Casting
Putting the slides in casting boxes
Cast with PDMS and cure at 60°C for about 1 hour.
Remove the cast
Plasma activate a clean glas slide and the PDMS piece (where to get the plasma from?)
Put the PDMS piece back into a clean box and cover with a tube holder plate. Punch the holes.
Attatch tubes and capture the microflow with a webcam stage.
Parts lasercut from acrylic in the FabLab Lucern.
File with drawings of the cast forms and webcam stage: File:UFlow Casts.pdf