CO2 Soil Respiration Chamber

From Hackteria Wiki
Revision as of 06:23, 17 June 2018 by Dusjagr (talk | contribs) (CO2 soil chambers)
Jump to: navigation, search

Developed during the RandeLab Soil Retreat

See Hackteria Website

CO2 soil chambers

BambooBox

IMG 20180616 122121.jpg

Wiring diagram

CO2-BambooBox WiringSchema.jpg

RandeChamber aka Kilju Chamber

RandeSoilChamber.jpgKiljuChamber laserCut.jpg

Failed PCB...

KiljuBox SZ-Ready.pngCO2 littleBox digitalMockUp.png

First Prototypes

First CO2 setup MH-Z19.jpgFirst CO2 soil trial MH-Z19.jpg

Comparing sensors and chambers

Using the Our-Sci Platform

IMG 20180419 172702 HDR.jpg

https://app.our-sci.net/#/survey

Our-sci dataPlot.png

Coll project logos.jpg

More about CO2 sensors:

See RandeLab GitHub for Arduino / Teensy codes

Nondispersive infrared sensor

MH-Z16, available with an I2C board:

MH-Z19:

MH-Z19 working.jpg

This page is about the MH-Z19 CO2 sensor and some experiments done with it:

Using the MH-Z19 CO2 sensor PWM readout, simple arduino code:

More on ABC, Automatic Baseline Correction

Immerhin kann man den Sensor per Hd-Pin (7s gegen GND) auf 400ppm (Außenluft) eichen.

CCS811

CCS BME combo

2017-03-25T20-47-46.605Z-BME280 CCS811.jpg

https://learn.sparkfun.com/tutorials/ccs811bme280-qwiic-environmental-combo-breakout-hookup-guide#resources--going-further

This one I ordered 2.... but check I2C adress. and connect "WAK" to GND

  • #define CCS811_ADDR 0x5A //Alternate I2C Address
  • myBME280.settings.I2CAddress = 0x76;

https://www.tindie.com/products/onehorse/air-quality-sensors/